Sharp IQ-8000 Manual de instalación Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 125
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
8.2.2 Error Codes
The seven-segment LEDs, D49 and D50, will indicate certain errors that can occur when
processing cards. They also can communicate “fatal” errors that could occur. The following chart
describes different error codes that are displayed by the seven-segment LEDs:
D Warning Error
Display Codes
Possible Problem
What to Do
C0 Card Error:
Parity check fail
Bad Card or dirty reader head
Clean reader head and re-try
C1 Card Error:
LRC check failed
Bad Card or dirty reader head
Clean reader head and re-try
C5 Card Error:
data length mismatch
Check for correct format type
Verify that the correct reader
technology is specified
CC Card Error:
data conversion
Check for correct format type
Verify that the correct reader
technology is specified
CE Card Error:
end-code not found
Bad card or dirty reader head
Clean reader head and re-try
CF Card Error:
facility code
The site code is invalid for
this site
Load correct facility code or
check cards
EC Hardware
Configuration error
The IQ-400 is not configured
correctly
In LiNC-NET for Windows,
select the Panel Setup icon
and the Hardware file-tab to
verify that the extension
adapters are selected for this
IQ-400.
Page lxx of 110 IQ-400 Installation Manual 33-10057-001-C
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 124 125

Comentarios a estos manuales

Sin comentarios