Sharp MX 2700N - Color Laser - All-in-One Manual de instrucciones descargar pdf (Pagina 39)

2 SafeCom Controller

D60700-07

2.8.13 Enable Copy Control

Copy Control requires installation of a SafeCom MFP Cable plus some additional

configuration. Refer to 2.6 for details. On the SafeCom Controller web

interface you need to:

1. Open the Advanced Configuration web page (2.7.2).

2. Click Printer and change Copy Enabled to YES and change Use auto

configuration to YES.

3. If required you can change Copy Idle Timeout. When the MFP has been

idle for this timeout the user is automatically logged out. A value of 0

seconds means no timed logout.

4. Click Save and Continue.

5. Click Restart.

2.8.14 Restore factory default

You can either restore settings by holding down the SafeCom Controller's test

button for 8 seconds, or from the SafeCom Controller web interface:

1. Open the Advanced Configuration web page (2.7.2).

2. Click Restore Factory Default.

2.8.15 Specify another port than 9100

1. Open the Advanced Configuration web page (2.7.2).

2. Click Printer and change Printer Port Number to the new port number.

3. Click Save and Continue.

4. Click Restart.

2.8.16 Enable High Speed Print

When High Speed Print is enabled print data is to be sent directly (and

unencrypted) to the printer from the SafeCom server rather than through the

SafeCom Controller.

1. Open the Advanced Configuration web page (2.7.2).

2. Click Printer and change High Speed Print Enabled to YES.

3. Click Save and Continue.

4. Click Restart.

2.8.17 Enable SafeCom Go

On the SafeCom Controller web interface you need to:

1. Open the Advanced Configuration web page (2.7.2).

2. Click Printer and change Printer Manufacturer to XEROX or SHARP.

3. Change SafeCom Go to YES.

4. Click Save and Continue.

5. Click Restart.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Sin comentarios

Sharp MX 2700N - Color Laser - All-in-One Manual de instrucciones Pagina 39