Sharp DM-4500 Instrucciones de operaciones descargar pdf (Pagina 32)

6. Assembly

Transmitted light and incident light analyzer

• Remove the plug cap on the left side of the

stand.

• Insert the analyzer into the receptacle until it

latches in place (Fig. 30).

Motorized analyzer

• Insert the analyzer cube into the correspond-

ing position on the filter turret as described in

section "6.7 Equipping the incident light turret

disk" → p. 30. For details on the proper

position for the analyzer cube, please refer to

the identification sheet provided.

Fig. 30 Inserting the analyzer

1 The plug cap is replaced with the analyzer.

6.9 DIC prisms

• Insert the objective prism slide into the tube

slot (Fig. 31.1). The code letter must match the

code letter on the objective.

• In the Leica DM5000 B microscope, the DIC

prisms are already installed in the DIC disk

above the objective turret (Fig. 68).

Fig. 31 Inserting the objective prism slide

1 Objective prism slide

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 163 164

Sin comentarios

Sharp DM-4500 Instrucciones de operaciones Pagina 32