Sharp DM-4500 Instrucciones de operaciones descargar pdf (Pagina 26)

6. Assembly

Fig. 17 Lamp mount with 12 V 100 W halogen bulb

Inserting the 12 V 100W halogen bulb into the

106/106 z lamp housing

• Unscrew the fastening screws of the cover

and flip the cover up (16.1).

• Unscrew the fastening screws of the lamp

mount (16.8) and pull out the mount (Fig. 17).

• Insert the lamp with the dust cover straight

into the socket until it stops.

Caution!

Do not remove the lamp’s dust cover until af-

ter you have installed the lamp. Avoid finger-

prints on the lamp.

• Remove the dust cover.

• Insert the lamp mount, with the burner in-

stalled, into the lamp housing and tighten it

with the screws (16.8).

• Close the lamp housing and retighten the fas-

tening screws.

• Place the lamp housing in the incident light

lamp housing receptacle (18.1) and fasten it

with the clamping screw on the side.

• Connect the lamp housing to the power supply

for incident light (symbol:

) (18.4).

Fig. 18 Rear view of stand

1 Incident light lamp housing receptacle

2 Transmitted light lamp housing receptacle

3 12 V 100 W connection for transmitted light (symbol: )

4 12 V 100 W connection for incident light (symbol: )

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 163 164

Sin comentarios

Sharp DM-4500 Instrucciones de operaciones Pagina 26