Sharp CD-G22000 Especificaciones

Busca en linea o descarga Especificaciones para Telescopios Sharp CD-G22000. Sharp CD-G22000 Specifications Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir

Indice de contenidos

Pagina 1 - Operating

G2 CCDOperating Manual

Pagina 2

These cameras are able to acquire color image in single exposure, without the necessity to change color filters. On the other side color mask brings l

Pagina 3 - Table of Contents

Model G2-0402G2-0402 model uses 0.4 MPx Kodak KAF-0402ME Class 1 or 2 CCD chip.Resolution768×512 pixelsPixel size9×9 µmImaging area6.9×4.6 mmFull well

Pagina 4

Output node capacity Approx. 220 000 e-Dark current 1 e-/s/pixel at 0°CDark signal doubling 6.3 °CModel G2-3200G2-3200 model uses 3.2 MPx Kodak KAF-32

Pagina 5 - Introduction

Full well capacity Approx. 40 000 e-Output node capacity Approx. 100 000 e-Dark current 0.3 e-/s/pixel at 0°CDark signal doubling 7 °CKAI-4022 CCD det

Pagina 6

Model G2-0402Gain1.5e-/ADU (1×l binning)2.3e-/ADU (other binnings)System read noise 12 e- (LN read)15 e- (Standard read)Full frame download 0.6 s (LN

Pagina 7

Model G2-4000Gain 1.0 e-/ADU (all binnings)System read noise 7 e- (LN read)10 e- (Standard read)Full frame download 6.8 s (LN read)5.7 s (Standard rea

Pagina 8

TEC modules Two stagesMaximal ∆T>50 °C below ambientRegulated ∆T48 °C below ambient (85% cooling)Regulation precision±0.1 °CHot side cooling Forced

Pagina 9

control software. Input voltage is displayed in the Cooling tab of the CCD Camera control tool in the SIMS. This feature is important especially if yo

Pagina 10 - CCD Chip

Package ContentsG2 CCD cameras are supplied in the foam-filled, hard carrying case containing:● Camera body with a user-chosen telescope adapter. The

Pagina 11 - Model G2-1600

● A CD-ROM with camera drivers, SIMS software package with electronic documentation and PDF version of this manual.● A printed copy of this manual.Opt

Pagina 12 - Model G2-4000

Version 2.3Modified on November 26th, 2009All information furnished by Moravian Instruments is believed to be accurate. Moravian Instruments reserves

Pagina 13 - Camera Electronics

Another filter wheel can be also ordered separately. Replacing the whole filter wheel is easier than replacing individual filters. It is possible to t

Pagina 14

contains high-pass Red, Green and Blue filters plus Luminance filter covering the combined RGB spectral range, blocking IR and UV portion of spectrum

Pagina 15 - CCD Chip Cooling

Telescope adapterThe camera is supplied with standard 2" barrel adapter by default, but the user can choose any other adapter he/she prefers. Ano

Pagina 16 - Power Supply

Canon EOS lens adapterStandard Canon bayonet adapterNikon F lens adapterStandard Nikon F bayonet adapterPSB-1100 adapter Threaded adapter for TeleVue

Pagina 17 - Mechanical Specifications

Getting StartedAlthough the camera is intended for operation at night (or for very low-light conditions at day), it is always better (and highly recom

Pagina 18 - Package Contents

site. Reject this offer (choose “No, not this time”) and click “Next” button.2. Choose the “Install the software automatically” in the next step.Inser

Pagina 19 - Optional components

USB port (different USB connector on the PC or through the USB hub), Windows reports “found new hardware” again and asks you to install the software.

Pagina 20 - LRGB filter set

g1ccd = g1ccd.dllg2ccd2 = g2ccd2.dllg3ccd = g3ccd.dll[GPS]GarminUSB = gps18.dllNMEA = nmeagps.dll[Telescope]NexStar = nexstar.dllLX200 = lx200.dllIndi

Pagina 21 - Separate filters

to provide information about available filters (if the particular camera has the integrated filter wheel, of course). But the user can order camera wi

Pagina 22 - Telescope adapter

Camera ConnectionCamera connection is pretty easy. Plug the power supply into the camera and connect the camera to the computer USB port using the sup

Pagina 23

Table of ContentsIntroduction...5Camera Technical Spe

Pagina 24 - Getting Started

starts to rotate and the camera control unit searches for the filter wheel home position. This operation takes a few seconds, during which the camera

Pagina 25

directly to USB ports available on the computer I/O panel or through the USB hub. The operating system assigns unique name to every connected USB devi

Pagina 26 - SIMS Software Installation

Camera OperationCamera operation depends on the software used. Scientific cameras usually cannot be operated independently on the host computer and G2

Pagina 27 - G2 CCD Camera Driver for SIMS

Camera and the TelescopeThe camera needs some optical system to capture real images. It depends on the telescope adapter to which telescopes (or lense

Pagina 28

(SIMS User's Guide explains why cooling is important to reduce thermal noise). If you plug the G2 CCD to power supply, you may notice the fans on

Pagina 29 - Camera Connection

target temperature is displayed in cyan color on the graph. The current chip temperature is displayed in red. Also notice the blue line, which display

Pagina 30 - Working with Multiple Cameras

First ImagesActual exposure is performed from the “Exposure” tab of the CCD Camera tool.Illustration 15: Exposure tab of the CCD Camera Control toolIt

Pagina 31

options for every exposure type separately. So it is possible e.g. to define separate folders for dark frames and for flat fields.Always check whether

Pagina 32 - Camera Operation

better with the related horizontal sliders. Observe how the image view is changed when you alter these values.The best positions of Low and High contr

Pagina 33 - Temperature Control

Illustration 17: The raw image downloaded from the cameraThe Dark frame is taken with the same exposition time at the same CCD chip temperature. Becau

Pagina 34

First Images...36Brightness and Contrast – Image Stretching..

Pagina 35 - °C per minute

Illustration 20: Flat field represents the telescope/camera response to uniformly illuminated field Illustration 21: Fully calibrated image with dark

Pagina 36 - First Images

● Color CCD chips have one fixed set of filters without the possibility to exchange them or to completely remove them. Monochrome chip is capable to t

Pagina 37

Illustration 22: “(L)RGB Image Add“ tool in SIMS...Illustration 23: ...and a resulting image42

Pagina 38 - Calibration

If we take images for individual colors and also luminance image, possibly with different binning and exposure times, the calibration starts to be rel

Pagina 39

There are several algorithms for calculating missing color components of individual pixels – from simply using of color from neighboring pixels (this

Pagina 40

the original raw image.Also please note the settings of the “Bayer X odd” and “Bayer Y odd” check boxes must be altered when any geometric transformat

Pagina 41

46Illustration 25: Histogram and Stretch tool shows histograms of individual colors

Pagina 42

Some General Rules for Successful ImagingAdvanced CCD cameras caused a revolution in amateur astronomy. Amateurs started to capture images of deep-sky

Pagina 43

● Focus image properly. Almost unnoticeable focuser shift affects star diameter. Focusing, especially on fast telescopes, is critical for sharp images

Pagina 44

successful night out. Nights can become cloudy or foggy, the full Moon can shine too much, the seeing can be extremely bad… Number of things can come

Pagina 45 - Balancing colors

IntroductionThank you for choosing the G2 CCD camera. The cooled, slow-scan series of G2 CCD cameras were developed for imaging under extremely low-li

Pagina 46

Camera MaintenanceThe G2 CCD camera is a precision optical and mechanical instrument, so it should be handled with care. Camera should be protected fr

Pagina 47 - Successful Imaging

amount of water absorbed – it is bright orange when it is dry and turns to transparent without any color hue when it becomes wet. The temperature rang

Pagina 48

The desiccant chamber used in G2 cameras revision 3 and higher can be filled with a hot silica-gel without a danger of damaging of the container.Chang

Pagina 50 - Camera Maintenance

Warning:Do not fill the plastic chamber in the G2 cameras revision 1 and 2 with hot silica gel. Let it cool down first, preferably in some hermetical

Pagina 51

Camera cannot be opened in such case.Opening the camera head of G2 cameras revision 1 and 2The blade shutter rotates 180° between individual snapshots

Pagina 52

Every filter position in the wheel is defined by the index hole. The hole defining the first position is preceded by another hole.Older versions of G2

Pagina 53

57Illustration 29: Filter positions on filter wheels with 5 and 6 positions and 98 mm diameterIllustration 30: Filter positions on filter wheels with

Pagina 54 - Changing Filters

Changing the Whole Filter WheelThe whole filter wheel can be changed at once. It is necessary to remove the front part of the camera case the same way

Pagina 55

to the host PC. Although G2 CCD cameras can operate through a USB hub, it can negatively affect the camera performance, like download time etc. It is

Pagina 56

Camera Technical SpecificationsG2 series of CCD cameras are manufactured with two kinds of CCD detectors:● G2 cameras with Kodak KAF (Full Frame – FF)

Pagina 57

● G2 cameras with Kodak KAI (Interline Transfer – IT) architecture. There is a shielded column of pixels just beside each column of active pixels on t

Pagina 58 - Power Supply Fuse

G2 camera models with Full Frame CCD detectors:Model G2-0402 G2-1600 G2-3200CCD chip KAF-0402ME KAF-1603ME KAF-3200MEResolution768×512 1536×1024 2184×

Comentarios a estos manuales

Sin comentarios