Sharp MX-7001 Manual de usuario Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 710
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
53
Replacing the staple cartridges in the saddle stitch unit
1
Open the front cover.
2
Grasp the handle on the saddle stitch
unit and pull it slowly out until it stops.
3
Pull the staple unit in the saddle stitch
unit out and then rotate it up.
4
Grasp the left and right side of each
empty staple cartridge and remove the
cartridges.
5
Load new staple cartridges.
Replace both staple cartridges.
Remove the cover from each staple cartridge and then install
the cartridge.
6
Pull the staple unit of the saddle stitch
finisher forward and then rotate it back
to its original position.
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 709 710

Comentarios a estos manuales

Sin comentarios