Sharp ER-01PU Especificaciones descargar pdf (Pagina 22)

ER-OIPU

No. COMMAND

FUNCTION

CODE

ESC d n

Print and feed paper “n”

lines

<1Bh>.c64h>n

[Function]

Prints the data in the print buffer and feed the paper for “n” lines.

[Default]

n=O

No. COMMAND

FUNCTION

CODE

ESC i

Full cut

<1Bh><69h>

[Function]

Executes a full cut of the paper.

[Notes]

Valid only at the beginning of a line

Causion:

After this command is executed,

You had better execute one line

feed or one line print to prevent

the Paper Jam.

No. COMMAND FUNCTION CODE

40 ESC m Partial cut

<1Bh><6Dh>

[Function]

Executes a partial cut of the paper.

[Notes]

Valid only at the beginning of a line

Causion:

feed or one Ime print to prevent

No.

COMMAND FUNCTION

CODE

ESC O Print stamp

<1Bh><6Fh>

[Function]

Stamp printing of MAX 20 mm in vertical size is performed.

[Notes]

Valid only at the beginning of a line.

The stamp data is printed on the receipt side only.

6-dot feed is performed regardless of the line feed pitch setting before

the stamp data is printed.

[Reference]

A distance of 16.8 mm is provided between the cutter position and

thermal head c1 position. In printing the stamp between them, verti-

cal size of 15.8 mm can be used.

.- ---

7 1

~ Cutterposition

.-..-J........;.-........

16.8mm

‘P

Stamp

15.8mm

------

~ Printposition

(Thermalhead

position)

The following methods are used to print the stamp data between the

cut position and print position.

1) Execution of print stamp command (ESC o)

2) Execution of cut command (ESC 1)

Stamp printing in this case is for the next receipt.

42 ESC p m tl t2

Generate

specified pulse

<1Bh><70h> p m tl t2

[Range]

m = O,1, 48, 49

0 S tl S t2 S 255

[Function]

Outputs the specified pulse on the drawer connector.

For connector pin “m”, the signal is held ON for tl x 2 ms and OFF for

t 1 x2 ms.

The value of “m” is used as follows.

[Notes]

When opening the Sharp drawer, 20 S tl S 25 and 250 S t2 must be

applied.

I I

Set power failure

43 ESC q DATA ma~

Bh><71h> DATA

[Range]

OS DATA S 255

DATA: ASCII code

[Function]

Prints the mark of interrupted printing when power failure is caused

during printing.

Sets this mark.

Performs one-line printing of this character when power failure is

caused during printing.

4-13

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 85 86

Comentarios a estos manuales

Sin comentarios

Sharp ER-01PU Especificaciones Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Sharp ER-01PU