Sharp ER-01PU Especificaciones descargar pdf (Pagina 12)

ER-OIPU

No. COMMAND

FUNCTION CODE

RS Journal tab

<1Eg>

No.

COMMAND

FUNCTION

CODE

DC2

Cancel character height reduction

<12h>

[Function]

Cancels character height reduction.

[Function]

Moves the print position to the beginning of journal paper.

[Notes]

This command is valid only when set at the beginning of a line.

[Notes]

This command is valid only when receip~ournal same data printing is

canceled.

ERO1PU cannot print data during receip~ournal,

However, print data can be edited and set during receiptijournal in

light of data compatibility, for ordinary receiptijournal printers can print

data then.

Therefore, be sure to set this command at the beginning when setting

the print data in the journal side.

[Reference]

[S1]: Select character height reduction

No.

COMMAND

FUNCTION

CODE

7, DLE EOT n Transmit status in real time

CIOh><04h>n

[Reference]

[ESC] Z: Select/cancel R/J same data printing

[Range]

ISn S4

[Function]

Transmits the status in real time by setting “n”.

I No. I COMMAND I

FUNCTION I CODE I

141

CAN

I Cancel print data

Function

1 Transmits the printer status.

[Function]

Transmits the offline factor status.

3 Transmits the error factor status.

Standard mode)

Erases one line of print data not put in line feed codes in the

receive buffer.

4 I Transmits the paper detector status.

Page mode)

This command is executed regardless of the state of the host com-

puter. (The DSR signal is not checked.)

Erases one page of print data not put in FF codes in the receive

buffer.

Moves the print position to the beginning of journal paper.

This command is executed even if offline, receive buffer full or error

states are provided.

Status transmission is made immediately when this command is

[Notes]

received.

When print data may be missed due to power failure, etc. during

printing, it is necessary to resend print data after recove~ for correct

printing. This command is provided mainly for such cases.

n=l; Printer status

bit I Function Value 0/1

o Not used Fixed to O

1 Not used Fixed to 1

2 Drawer status

“L’’/’’H”

3 Online/Offline state

online/Offline

In the standard mode, it is possible to cancel a line for which power

failure is caused during receiving.

In the page mode, it is possible to cancel a page for which power

failure is caused during receiving.

4 Not

US~d

Fixed to 1

5 Not defined

6 Not defined

7 Not used

Fixed to O

No.

COMMAND FUNCTION

CODE

SI Selects character heiaht reduction

<OFh>

n=2; Offline factor status

bit Function

Value 0/1

0 aNot used

Fixed to O

1 Not used

Fixed to 1

2 HEAD UP LEVER

Close/Open

I Paper feed SW

Paper not being fed/Paper

[Function]

Starts character height reduction.

Reduces the character height to 1/2 by removing bits one by one.

[Note]

This command is valid only when set at the beginning of a line.

being fed

4 Not used

Fixed to 1

5 Print stop due to no paper

Not stopping/Stopping

6 Error state

No error caused/Error

caused

7 Not used

Fixed to O

bit 5; Becomes 1 in case of print stop set by IESC]CO and

[ESC]C4.

[Reference]

[DC2]: Cancel character height reduction

4-3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 85 86

Comentarios a estos manuales

Sin comentarios

Sharp ER-01PU Especificaciones Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Sharp ER-01PU