Sharp R-323T Especificaciones descargar pdf (Pagina 4)

Information About Electrical Connection

TABLE 1

12 Volt Supply Wiring & Fuse Size

2-Way Models 3-Way Models

min. wire

size

max. fuse

size

min. wire

size

max. fuse

size

0-20’ 18 AWG 6 Amp 12 AWG 20 Amp

over 20’ 18 AWG 6 Amp 10 AWG 30 Amp

Electrical Connection - 120 Volts AC

The refrigerator is equipped with a three prong plug

for protection against shock hazard and must be

connected into a recognized three prong attachment

receptacle. The free length of cord is 24". The cord

must be routed so as not to come in contact with the

burner cover, flue pipe or any other component that

could damage the cord insulation.

DO NOT REMOVE (CUT) GROUNDING PRONG

FROM THE REFRIGERATOR AC POWER CORD.

REMOVAL OF THIS PRONG CAN RESULT IN A

SEVERE ELECTRICAL SHOCK, AS WELL AS

VOIDING THE REFRIGERATOR ELECTRICAL

CERTIFICATION AND WARRANTY.

12 Volt DC Supply Connection

A 12 volt DC supply connection is only necessary if

the refrigerator is a 3-Way model - either a Model

323 or a Model 322 with the DC option added by a

dealer. Both the AC and GAS modes operate with-

out a need for 12 volts.

If the 12 volt connection is required, the negative

connection from the battery is connected to terminal

5 on the terminal block and the +12 volt from the

battery is connected to an in-line fused wire which,

in turn is connected to terminal 6. See wiring dia-

gram at the end of this section. Both negative and

positive supply wires require

⁄

" female quick con-

nect terminals.

See TABLE 1 for supply wire and fuse sizing. The

wire size is determined by the DC load (heater draw)

and the distance the current must travel from the

battery. Should the wire size be too small, a result-

ing voltage drop reduces the heater wattage and the

cooling capacity in the DC mode. The refrigerator is

designed to operate at full cooling capacity, unlike

other RV refrigerators which operate at a reduced

capacity to conserve battery drainage. The DC heat-

ing element has a continuous current rating of 11.6

amps @ 12VDC.

WARNING

1 2 3 4 5 6 7 8 9 ... 22 23

Comentarios a estos manuales

Sin comentarios

Sharp R-323T Especificaciones Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Microondas Sharp R-323T