Sharp Qtopia Desktop Manual de usuario descargar pdf (Pagina 14)

8 SYNCHRONIZING DATA

Click the General icon on the left of the screen.

The screen has two tabs for general settings telling you how to set up preferences:

Connection Tab: This sets the way Qtopia Desktop communicates with

the device.

PDA Connection Method: Sets the connection method between the Qtopia

Desktop and the device.

USB Check “USB” to set the communication to the USB

connection.

Serial Check “Serial” to set the communication to the serial

connection. (Optional Serial Cable CE-170TS is

required.)

Connection: Displays the IP address of the device for the USB or serial

connection. Normally, no change is necessary for the default

setting. If the IP address of the device has been changed, the same

address must be entered. Tap the Network & Sync icon for the

Setting tab and use the Sync tab to set the IP address of the device.

PDA IP Address By default:

“192.168.129.201” for USB connection.

“192.168.130.101” for serial connection.

Sync Tab: This sets how the Qtopia Desktop synchronizes with

the device.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 38 39

Sin comentarios

Sharp Qtopia Desktop Manual de usuario Pagina 14