Sharp UX-4000M - UX 4000 B/W Laser Printer Guía de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 194
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
EN
Specifications A-9
Envelopes
Envelope Construction
Envelope construction is critical. Envelope fold lines can vary
considerably, not only between manufacturers, but also within a box
from the same manufacturer. Successful printing on envelopes
depends upon the quality of the envelopes. When selecting
envelopes, consider the following components:
Weight:
The weight of the envelope paper should not exceed
28 lb (105 g/m
2
), or jamming may result.
Construction:
Prior to printing, envelopes should lie flat with less
than 0.25 inch (6 mm) curl, and should not contain air. (Envelopes
that trap air may cause problems.)
Condition:
Make sure envelopes are not wrinkled, nicked, or
otherwise damaged.
Sizes in Tray 1: From 3 by 5 inches (76 by 127 mm) to 8.5 by 14
inches (216 by 356 mm).
Sizes in the optional envelope feeder: From 3.5 by 6.3 inches
(90 by 160 millimeters) to 7 by 10 inches (178 by 254 millimeters).
If you do not have an optional envelope feeder, always print
envelopes from Tray 1 (page 37). To print envelopes with the
optional envelope feeder, see page 39. If envelopes wrinkle, try
opening the rear output bin.
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 193 194

Comentarios a estos manuales

Sin comentarios