Sharp AR-350 Especificaciones descargar pdf (Pagina 83)

5-15

Troubleshooting (concerning the finisher)

Check the list below before contacting the SHARP Service Center.

FINISHER

Problem

Stapling position is

not correct.

The finisher does

not operate.

Stapling cannot be

performed.

Stapling position not set properly in the

stapling setting?

The finisher is open or the top cover, front

cover or paper guide of the finisher open?

Message indicating need to remove paper

from the stapler compiler displayed?

Message requesting check for the staple

unit displayed?

Message requesting adding staples

displayed?

Different size paper included?

Paper heavily curled?

Check the stapling position setting. (See page xx.)

Close all covers. (See pages xx and xx.)

Remove all paper from the stapler compiler following

the procedure described in step 1 on page xx.

Remove jammed staples. (See page xx.)

Replace the staple cartridge. (See page xx.)

Stapling cannot be performed onto different size

paper.

Paper may be curled heavily depending on the paper

type and quality. Remove paper from the paper tray

or the bypass tray, turn it upside down, and load it

again.

Solution

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 117 118

Sin comentarios

Sharp AR-350 Especificaciones Pagina 83