Sharp AR-350 Especificaciones Pagina 82

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 81
5-14
Misfeed in the finisher
When a misfeed has occurred in the finisher during printing, remove the misfed paper following the procedure below.
1
Remove the misfed paper from the stapler
compiler.
Be careful not to tear the
misfed paper during
removal.
2
Open the top cover.
Top cover
Move the tab in the
direction of the arrow as
shown in the illustration to
open the top cover.
3
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
After removing the paper,
press down on the top
cover to close it.
4
Open the finisher.
Hold the knob and open
the finisher.
5
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
6
Open the paper guide and remove the
misfed paper.
Paper
guide
Be careful not to tear the
misfed paper during
removal.
7
Close the finisher.
FINISHER
Vista de pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 117 118

Comentarios a estos manuales

Sin comentarios