Sharp MX-C300W Especificaciones descargar pdf (Pagina 189)

189

SYSTEM SETTINGS

Polling Passcode # Mode

When "Polling Security" is enabled, use this setting to

program (or delete) the fax numbers of the machines

that are allowed to poll your machine. Programmed fax

numbers are called passcodes. Up to 10 fax numbers

can be programmed. To check the programmed

numbers, print the "List Print" (p.181).

If you make a mistake, move the cursor to the mistake

with the [ ] or [ ] keys and enter the correct number.

Scanner

System settings for the scanner function are explained

below.

Select the [Scanner] to configure the settings.

Disable USB Scan

Select whether or not scanning from a computer and

scanning from the machine are disabled when a USB

connection is used.

Default setting is "No" (disabled).

New Default

This is used to change the default settings for the

original size, resolution, format, and scanning

exposure in B/W mode. (For details, see "STORING

SCANNING SETTINGS" (p.130).)

• For details on each setting, see the pages below.

"Original Size Enter" (p.130)

"Resolution" (p.130)

"Format" (p.131)

"Mono2/Grayscale" (p.131)

To clear a passcode number, follow these

steps:

(1) Select "Delete" and then press the [OK]

key.

(2) Enter the control number that identifies

the number you wish to clear, and then

press the [OK] key.

(3) Select "Delete" with the [ ] or [ ] key

and then press the [OK] key.

Note

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 209 210

Sin comentarios

Sharp MX-C300W Especificaciones Pagina 189