Sharp AR-810 Manual de usuario descargar pdf (Pagina 16)

AR-651/810 TROUBLE SHOOTING 5 - 16

[E13] 1st cassette misfeeding (paper not reaching the 1st cassette feed sensor)

Open the feed cover. Is there any paper in front of the 1st cassette feed sensor?

YES

Remove the paper.

Is the 1st cassetter feed sensor working?

(Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[2]/[B])

1. Check if the connector of the 1st cassette feed sensor is disconnected.

2. Check if the connector J329 on the LGC board is disconencted.

3. Check if the connector pins are disconnected and the harnesses are open-circuited.

4. Check if the conductor pattern on the LGC board is shor t- or open-circuited.

5. Replace the 1st cassette feed sensor.

6. Replace the LGC board.

YES

Is the 1st cassette feed clutch working?

(Perform the output check in the test mode: 03-201)

1. Check if the connector of the 1st cassette feed clutch is disconnected.

2. Check if the connector J329 on the LGC board is disconnected.

3. Check if the connector pins are disconnected and the harnesses are open-

circuited.

4. Check if the conductor pattern on the LGC board is shor t- or open-circuited.

5. Replace the 1st cassette feed clutch.

6. Replace the LGC board.

YES

Check the 1st cassette feed roller and separation roller. Replace them if they are worn out.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 100 101

Sin comentarios

Sharp AR-810 Manual de usuario Pagina 16