Sharp R-310J Manual del operador descargar pdf (Pagina 17)

Page 17

ADJUST PEELER PLATE AS FOLLOWS

1. Using the provided 9/64” Allen wrench just loosen – DO NOT REMOVE -

the two 8-32 SHCS located on the left side of the peeler assy. (see “C” in

fig. 11)

2. Using the a 5/32” Allen wrench just loosen – DO NOT REMOVE - the two

10-32 SHCS located under the starwheel adjustment bar (see “D” in Fig.

11) to the right of the peeler assy. (see “E” fig. 11)

3. Adjust the peeler plate.

4. Re-tighten all screws.

Fig 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Sin comentarios

Sharp R-310J Manual del operador Pagina 17