Sharp EC-12TWT4B Instrucciones de operaciones Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 39
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
QUICK REFERENCE
Attaching/Detaching the Stand Setting the TV on the Wall
Before attaching (or detaching) the stand, unplug the AC
cord from the AC INPUT terminal.
Before performing work spread cushioning over the base
area
to
lay the
"TV
on. This will prevent it from being
damaged.
Attach the stand
in
the correct direction.
Do
not remove the stand from the TV unless using an
optional wall mount bracket
to
mount it.
Be sure to follow the instructions. Incorrect
installation of the stand may result in
the
TV falling
over.
rI!mD
This TV should
be
mounted on the wall only with the
AN-37AG5 (SHARP) wall mount bracket. The use of
other wall mount brackets may result
in
an unstable
installation and may cause serious injuries.
Installing the TV requires special skill that should
only
be
performed by qualified service personnel.
Customers should not
attempt
to do the work
themselves. SHARP bears
no
responsibility
for
improper mounting or mounting
that
results
in
accident
or
injury.
,.
::;:
Angular mounting
The center of the display:
5/
16
inch (7.5 mm) above
the "A" position.
Refer to the operation
manual of AN-37AG5 for
details.
Vertical mounting
01
About setting the TV angle
Hanging on the wall
AN-37AG5 wall
mount
bracket.
(See
the bracket instructions for details.)
Using an optional bracket to mount the TV
You can ask a qualified service professional about
using an optional AN-37AG5 bracket
to
mount the
TV
to
the wall.
Carefully read the instructions that come with the
bracket before beginning work.
2
CD
Insert the stand into the openings on the bottom
of
the
TV.
Be sure
to
attach the stand
to
the
"TV
with the wider
side
of
the base facing forward.
® Insert and tighten the 4 screws into the 4 holes
on the bottom
of
the stand.
1 Confirm that there are 4 screws supplied with the
stand unit.
To detach the stand, perform the steps
in
reverse order.
mm
Detach the cable clamp on the rear
of
the
"TV
when using
the optional mount bracket.
Due to the terminal configuration on this
"TV,
when you
wall-mount this model, make sure there
is
enough space
between the wall and the
"TV
for the cables.
To use this
"TV
mounted on a wall, first remove the adhesive
tape at the 4 locations on the rear
of
the
"TV,
and then use
the screws supplied with the wall mount bracket
to
secure
the bracket
to
the rear
of
the
"TV.
7
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

Comentarios a estos manuales

Sin comentarios