Sharp PC-9800T Especificaciones descargar pdf (Pagina 46)

<Ver. 2.1>

Special installation (Wall embedding (vertically wall-embedding equipment))

3.4.11 Wall embedding (vertically wall-embedding equipment)

This display is designed to accommodate embedding in a wall. Since the allowable range of outside-air temperature

depends on the installation conditions. Please observe the following conditions:

1 If the unit must be embedded in the wall, the side slots of the unit must not be blocked. Avoid blocking the

ventilating holes in the rear as much as possible.

2 Use a metal mounting fixture that does not block the side slits or the back ventilation holes, and attach at a

minimum of four points. To avoid breaking the PDP panel, limit any twisting or bending stress applied to the

display to 1 mm or less.

Do not use cable clamps for this installation method. Cable clamps can interfere with proper ventilation and

result in device failure.

4 Installation conditions and ambient operating temperatures:

(1) If the space behind the wall is open

Never block the side slots. Avoid

blocking the ventilating holes of the

rear of the unit as much as possible.

Side slits

Caution

A ≥ 100 mm, B ≤ 150 mm

A ≥ 100 mm, B ≥ 150 mm

A ≤ 100 mm, B ≤ 80 mm

A ≤ 100 mm, B ≥ 80 mm

X, Y space upper temperature limits

35 °C

35 °C (Animation), 30 °C (Still)

35 °C

30 °C

Install the display with

the fan on top.

MAX. 20 mm

(for both top

and bottom)

Take C to be 30 mm or more.

100

Exhaust

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 135 136

Sin comentarios

Sharp PC-9800T Especificaciones Pagina 46