Sharp R-201T Manual de instrucciones descargar pdf (Pagina 21)

MS 201 T

English

19

Holding the chain saw

N Place the chain saw securely on the

ground – assume a steady stance –

the saw chain must not touch any

objects and also must not touch the

ground

N Hold the control handle of the chain

saw firmly in the right hand

N Support the right knee on the

carburetor cover

Starting

N With the right hand, pull the starter

grip slowly until you feel it engage –

and then give it a brisk strong pull –

simultaneously press down on the

handlebar – do not pull the starter

rope out all the way – risk of

breakage! Do not let the starter grip

snap back – guide it vertically back

into the housing so that the starter

rope can rewind properly

With a new engine or after a long period

of disuse, with machines without an

additional manual fuel pump, it may be

necessary to pull the starter rope several

times – to prime the fuel line.

Starting the chain saw

There must not be anyone within the

swivel range of the chain saw.

N Push the hand guard (1) forwards –

the chain is blocked

N Simultaneously press the throttle

trigger lockout (2) and throttle

trigger (3) – set master control

lever (4)

Position cold start l

– If engine is cold (even if the engine

has stalled during opening of

throttle after starting)

Position warm start n

– If engine is warm (once the engine

has been running for approx. one

minute)

217BA007 KN

0012BA008 KN

0012BA009 KN

2

3

4

H

L

1

STOP

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Comentarios a estos manuales

Sin comentarios