Sharp AL-1217 Especificaciones descargar pdf (Pagina 63)

MISFEED REMOVAL

When the misfeed ( ) indicator blinks or blinks in the display, the unit will

stop because of a misfeed. If a misfeed occurs when using the SPF, a number may

appear in the display after a minus sign. This indicates the number of the originals

that must be returned to the original feeder tray after a misfeed. Return the required

number of originals. Then this number will disappear when copying is resumed or the

clear ( ) key is pressed. When the SPF misfeeds an original sheet, the unit will

stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator

will remain off. For a misfeed of originals in the SPF, see "D: Misfeed in the SPF (AL-

1457)" (p.64).

Open the multi-bypass tray (AL-1457), and side cover, in that

order.

To open the multi-bypass tray, see "The multi-bypass tray (AL-1457)"

(p.17). To open the side cover, see "INSTALLING THE TD CARTRIDGE"

(p.10).

Check the misfeed location. Remove the misfed paper

following the instructions for each location in the illustration

below. If the misfeed ( ) indicator blinks, proceed to "A:

Misfeed in the paper feed area" (p.62).

If paper is misfed here, proceed to "A:

Misfeed in the paper feed area". (p.62)

If paper is misfed here, proceed to "B:

Misfeed in the fusing area". (p.62)

If the misfed paper is seen from

this side, proceed to "C: Misfeed

in the transport area". (p.63)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 85 86

Sin comentarios

Sharp AL-1217 Especificaciones Pagina 63