Sharp R-202M Manual del operador descargar pdf (Pagina 24)

Section 1: Assembly Table of Contents ► Great Plains Mfg., Inc..

Series VII 6113-6328 Field Cultivator, Rigid Hitch 560-202M 9/18/2003

Center Wing Stop / Rear Jack Stand Assembly

U-bolt the center wing stop (1) to the

second bar from the rear on the center frame as

shown in Figure 9. Use 1/2 x 3 x 5 u-bolts (2)

with lock washers and hex nuts. Center the

wing stop from side to side. Insert the 1/2 x 4

1/2 transport lock quick pins (3) in the holders

on the wing stop.

Insert the rear stand leg (4) into the

frame mount bracket (5) as shown in Figure 9.

Pin them together using the 3/4 x 4 1/2 pin

w/kepper (6). U-bolt the whole assembly to the

rear bar of the center frame using two 5/8 x 4

1/32 x 4 1/4 u-bolts (7) using lock washers and

hex nuts. Final placement of jack stand should

not interfere with shanks or finishing

attachment arms.

Figure 9

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

Sin comentarios

Sharp R-202M Manual del operador Pagina 24