Sharp CD-M4000 Guía de usuario descargar pdf (Pagina 82)

Running a GST-Guard Test

3-22 72A-1230 Rev. F

July 22, 2005

The following screen will appear:

Figure 3.14 DTA Test In Progress

The test will proceed automatically. The test specimen’s current, watts loss,

and voltage will be displayed in three analog meters (horizontal bars) on the

screen. The digital values for these parameters will be shown to the right of the

meters. The table on the screen describes test conditions and test results. The

horizontal bar at the bottom of the screen displays the status of the test.

For each test being performed, the voltage will ramp to the preselected

maximum twice. This is required to implement the selected interference

cancellation technique (Line Synchronized Reversal or Line Frequency

Modulation).

When the test is over, the status bar will read “Test Done”.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 203 204

Sin comentarios

Sharp CD-M4000 Guía de usuario Pagina 82