Sharp LC-65D93U Instrucciones de operaciones descargar pdf (Pagina 55)

Appendix

PC Control of the TV

- When a program

set, the TV can be controlled from the

using the RS-232C terminal. The input signal

(PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made,

enabling automatic programmed playing.

-Attach

RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the

connections.

• This operation system should be used by a person who

accustomed to using computers.

Communication conditions

Set the RS-232C communication settings on the

to match the TV's communication conditions.

The TV's communication settings are as follows:

9,600 bps

8 bits

None

1 bit

None

Communication procedure

Send the control commands from the PC via the RS-232C connector.

The TV operates according

the received command and sends a response message

the PC.

Do not send multiple commands at the same time. Wait until the

receives the OK response before sending the

next command.

Command format

Eight ASCII codes +

Command 4-digits

Command 4-digits: Command. The text of four characters.

'---

\------/

Parameter 4-digits: Parameter 0 -

blank, ?

Parameter 4-digits Return code

Parameter

Input the parameter values, aligning left, and

fill

with blank(s) for the remainder.

(Be

sure that 4 values are input for

the parameter.)

When the input parameter

not within

adjustable range, "ERR" returns. (Refer

"Response code format".)

Any numerical value can replace the "x" on the table. .

When "?"

input for some commands, the present setting value responds.

@-S4

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 69 70

Comentarios a estos manuales

Sin comentarios

Sharp LC-65D93U Instrucciones de operaciones Pagina 55

Comentarios a estos manuales

Relacionado con productos y manuales para Televisores Lcd Sharp LC-65D93U