Sharp MX-B201D Guía de inicio rápido

Busca en linea o descarga Guía de inicio rápido para Máquinas de fax Sharp MX-B201D. Sharp MX-B201D Quick Guide Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
PRINTED IN CHINA 2011C KS1 TINSE2161QSZZ
FACSIMILE EXPANSION KIT
START GUIDE
MODEL: MX-FX12
CONNECTIONS
CONNECTING THE TELEPHONE LINE CORD
Plug one end of the telephone line cord into
the jack on the machine marked "LINE."
Plug the other side into a standard (RJ11C)
single-line telephone wall jack. Be sure not
to plug this telephone line cord into the
"TEL" jack. The "TEL" jack is used to attach
an extension telephone or answering
machine to the machine. (See
"CONNECTING OTHER DEVICES")
FINAL PREPARATIONS
CONNECTING OTHER DEVICES
If desired, an answering machine or external telephone can be connected
to the machine through the telephone jack, labeled "TEL," on the rear of
the machine.
Connecting an answering machine to the machine allows you to receive
both voice and fax messages when you are out. To use this feature, first
change the outgoing message of your answering machine, and then set
the reception mode of the machine to "A.M." (Answering Machine mode)
when you go out.
Comments:
1.It is advisable to keep the length of the message under 10 seconds. If it
is too long, you may have difficulty receiving faxes sent by automatic
dialing.
2.Your callers can even leave a voice message and send a fax message
on the same call. Modify your outgoing message to explain that this can
be done by pressing their [START] key ( ) after leaving their voice
message.
You can connect an extension phone to the machine to make and
receive calls like any other extension phone on your line. Even if you
pick up the extension phone and hear a fax tone, the machine will
automatically cut in and take over the line. Note, however, if you also
have a PC modem on the same line, you must turn on the Remote
Reception function, and deactivate the Fax Signal Receive function. See
"SETTING UP THE MACHINE FOR USE WITH A PC MODEM" (p.37)
and "USING THE REMOTE RECEPTION FUNCTION" (p.38).
ABOUT THE OPERATION GUIDES
The operation guides for the machine are as follows:
Start Guide (this manual)
This manual covers the procedures for setup and the safety relations.
Operation Guide for fax (on the MX-FX12 Operation Guide
CD-ROM)
This manual explains the procedures for using the machine as a fax
machine.
This manual only explains the fax functions of the machine. For general
information on using the machine, including safety information, installation,
paper loading, removal of paper misfeeds, and peripheral equipment, see
the operation guide for the machine.
How to use the operation guide
Detailed explanations of the functions that can be used on the machine
are provided in the Operation Guide in PDF format.
1
Insert the supplied CD-ROM
into your computer's CD-ROM
drive.
1
1
2
Display the contents of the CD-
ROM, and open the Operation
Guide file.
Operation Guide for machine (on the MX-B201D Operation
Guide CD-ROM)
Explains the machine and how to use it as a copier. Also explains how to
use the machine as a printer and scanner for your computer.
Operation Guide for network expansion kit (on the MX-NB11
Operation Guide CD-ROM)
This manual explains the procedures for using the machine as a printer or
a network scanner.
SPECIFICATIONS
* As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production machines. There may be some deviations
from these values in individual machines.
If your area experiences a high incidence of lightning or
power surges, we recommend that you install surge
protectors for the power and telephone lines. Surge
protectors can be purchased from your retailer or at
most telephone specialty stores.
If you are using distinctive ringing with an answering
machine, you do not need to follow the procedure
described below. (Please note that when distinctive
ringing is used, the answering machine must be
distinctive ring compatible.)
The Remote Reception function is initially set to "ON".
LIN
E
TEL
Note
Note
Note
Applicable telephone line Public switched telephone network
Compression method MH, MR, MMR, JBIG
Transmission modes
Super G3, G3 (the machine can only send
faxes to and receive faxes from machines
that support G3 or Super G3)
Scanning method CCD flatbed scanning
Scanning resolution
(supports ITU-T standards)
8 x 3.85 lines/mm (Standard)
8 x 7.7 lines/mm (Fine, Fine + Halftone)
8 x 15.4 lines/mm (Super Fine, Super Fine
+ Halftone)
Recording method Laser, electrostatic charge method
Transmission speed 33.6 kbps 2.4 kbps Automatic fallback
Transmission time
Approx. 2 seconds
(Super G3 mode / 33.6 kbps, JBIG),
Approx. 6 seconds
(G3 ECM mode / 14.4 kbps, JBIG)
Paper size
8-1/2" x 11"(Letter), 8-1/2" x 14"(Legal), or A4
Effective recording width 8-1/2" max. (8-1/2" x 14" printing)
Transmittable original size
When using the RSPF
Maximum
One-sided original: 8-1/2" x 19.7"
Two-sided original: 8-1/2" x 14"
Minimum
8-1/2" x 5-1/2"
When using the document glass
Maximum 8-1/2" x 14"
Effective scanning width 8-1/2" maximum
Halftone transmission 256 levels
Contrast (exposure) adjustment
Light, Medium, Dark
Extension telephone connection
Possible (1 telephone)
Auto dialing
Combined total of 18 One-Touch Dial and
Group keys; 100 Speed Dial numbers;
redialing (automatic)
Timer transmission Ye s
Automatic document feeding
Yes (50 pages)
Memory capacity 2 MB
Error Correction Mode(ECM)
Ye s
Operation Guide
CD-ROM
Manual US_English
Operation
Guide file
(PDF)
* To view the Operation Guide in PDF format, Adobe
®
Reader
®
or
Acrobat
®
Reader
®
of Adobe Systems Incorporated is required.
Adobe
®
Reader
®
can be downloaded from the following URL:
http://www.adobe.com/
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - START GUIDE

PRINTED IN CHINA 2011C KS1 TINSE2161QSZZFACSIMILE EXPANSION KITSTART GUIDEMODEL: MX-FX12CONNECTIONSCONNECTING THE TELEPHONE LINE CORDPlug one end of

Pagina 2 - NOTICE FOR USERS IN CANADA

INTRODUCTIONTYPE OF SERVICEThis equipment may not be used on coin-operated (pay phone) phone service. Connection to party lines service is subject to

Comentarios a estos manuales

Sin comentarios